VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 1 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 silicon pin photodiode description VBPW34FAs and VBPW34FAsr are high speed and high sensitive pin photodiodes. it is a surface mount device (smd) including the chip with a 7.5 mm 2 sensitive area and a daylight blocking filter matched with ir emitters operating at wavelength 870 nm or 950 nm. features ? package type: surface mount ? package form: gw, rgw ? dimensions (l x w x h in mm): 6.4 x 3.9 x 1.2 ? radiant sensitive area (in mm 2 ): 7.5 ? high radiant sensitivity ? daylight blocking filter matched with 870 nm to 950 nm emitters ? fast response times ? angle of half sensitivity: ? = 65 ? floor life: 168 h, msl 3, acc. j-std-020 ? lead (pb)-free reflow soldering ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to iec 61249-2-21 definition applications ? high speed detector for infrared radiation ? infrared remote control and free air data transmissionsystems, e.g. in combination with tsffxxxx note ? test conditions see table basic characteristics note ? moq: minimum order quantity 21726 vbp w 34fas vbp w 34fasr product summary component i ra (a) ? (deg) 0.5 (nm) v bpw34fas 55 65 780 to 1050 v bpw34fasr 55 65 780 to 1050 ordering information ordering code packaging remarks package form v bpw34fas tape and reel moq: 1000 pc s, 1000 pcs/reel gullwing v bpw34fasr tape and reel moq: 1000 pcs, 1000 pcs/reel re verse gullwing absolute maximum ratings (tamb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 60 v power dissipation t amb 25 c p v 215 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature acc. reflow sloder profile fig. 8 t sd 260 c thermal resistance junction/ambient r thja 350 k/w
VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 2 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - reverse dark current vs. ambient temperature fig. 2 - relative reverse light cu rrent vs. ambient temperature basic characteristics (tamb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 50 ma v f 11.3v breakdown voltage i r = 100 a, e = 0 v (br) 60 v reverse dark current v r = 10 v, e = 0 i ro 230na diode capacitance v r = 0 v, f = 1 mhz, e = 0 c d 70 pf v r = 3 v, f = 1 mhz, e = 0 c d 25 40 pf open circuit voltage e e = 1 mw/cm 2 , = 950 nm v o 350 mv temperature coefficient of v o e e = 1 mw/cm 2 , = 950 nm tk vo - 2.6 mv/k short circuit current e e = 1 mw/cm 2 , = 950 nm i k 50 a temperature coefficient of i k e e = 1 mw/cm 2 , = 950 nm tk ik 0.1 %/k reverse light current e e = 1 mw/cm 2 , = 950 nm, v r = 5 v i ra 45 55 a angle of half sensitivity ? 65 deg wavelength of peak sensitivity p 950 nm range of spectral bandwidth 0.5 780 to 1050 nm noise equivalent power v r = 10 v, = 950 nm nep 4 x 10 -14 w/ hz rise time v r = 10 v, r l = 1 k , = 820 nm t r 100 ns fall time v r = 10 v, r l = 1 k , = 820 nm t f 100 ns 20 40 60 8 0 1 10 100 1000 100 94 8 403 v r = 10 v t am b - am b ient temperat u re (c) i ro - re v erse dark c u rrent (na) 0.6 0. 8 1.0 1.2 1.4 94 8 409 v r =5v = 950 nm 100 8 0 60 40 20 0 i - re lati v e re v erse light c u rrent t - am b ient temperat u re (c) am b ra rel
VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 3 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - reverse light current vs. irradiance fig. 4 - reverse light current vs. reverse voltage fig. 5 - diode capacitance vs. reverse voltage fig. 6 - relative spectral sensitivity vs. wavelength fig. 7 - relative radiant sensitivity vs. angular displacement 0.01 0.1 1 0.1 1 10 100 1000 i ra - re v erse light c u rrent (a) e e - irradiance (m w /cm 2 ) 10 127 8 7 v r = 5 v = 950 nm 0.1 1 10 1 10 100 v r - re v erse voltage (v) 100 127 88 i ra - re v erse light c u rrent (a) 1m w /cm 2 0.5 m w /cm 2 0.2 m w /cm 2 0.1 m w /cm 2 0.05 m w /cm 2 = 950 nm 0 20 40 60 8 0 94 8 407 e = 0 f = 1 mhz c d - diode capacitance (pf) v r - re v erse voltage (v) 0.1 100 110 21743 - w a v elength (nm) s( ) , rel - relati v e spectral sensiti v ity 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 600 700 8 00 900 1000 1100 0.4 0.2 0 s rel - relati v e radiant sensiti v ity 94 8 406 0.6 0.9 0. 8 0 30 10 20 40 50 60 70 8 0 0.7 1.0 ? - ang u lar displacement
VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 4 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions for VBPW34FAs in millimeters drawing-no.: 6.541-5086.01-4 i ss ue: 1; 15.04.10 22105 8.9 5.4 1.8 recommended s older pad s pecification s according to din technical drawing s anode cathode 2.2 0.18 0.2 4.4 0.1 1.95 3.9 0.1 1 0.15 6.4 0.3 0.8 0.1 1.6 0.1 chip s ize 3 x 3 1.2 0.1 0.1 -0.1 (0.47 ref.) flat area 0.3 min. 0.75 0.05 0.15 0.02
VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 5 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions for VBPW34FAsr in millimeters drawing-no.: 6.541-5085.01-4 i ss ue: 1; 15.04.10 8.9 5.4 1.8 recommended s older pad s pecification s according to din technical drawing s a node cathode 2.2 0.18 0.2 4.4 0.1 1.95 3.9 0.1 1 0.3 6.4 0.3 0.8 0.1 1.6 0.1 chip s ize 3 x 3 0.1 min. (0.47 ref.) flat area 0.3 min 0.75 0.05 0.15 0.02 1.2 0.1 22104
VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 6 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping dimensions for VBPW34FAs in millimeters taping dimensions for VBPW34FAsr in millimeters 21730 21731
VBPW34FAs, VBPW34FAsr www.vishay.com vishay semiconductors rev. 1.2, 24-aug-11 7 document number: 81127 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reel dimensions for VBPW34FAs and VBPW34FAsr in millimeters solder profile fig. 8 - lead (pb)-free reflow solder profile acc. j-std-020 drypack devices are packed in moisture barrier bags (mbb) to prevent the products from moisture absorption during transportation and storage. each bag contains a desiccant. floor life time between soldering and re moving from mbb must not exceed the time indicated in j-std-020: moisture sensitivity: level 3 floor life: 168 h conditions: t amb < 30 c, rh < 60 % drying in case of moisture absorpti on devices should be baked before soldering. conditions see j-std-020 or recommended conditions: 192 h at 40 c (+ 5 c), rh < 5 % or 96 h at 60 c (+ 5 c), rh < 5 %. 21732 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperat u re (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp u p 3 c/s max. ramp do w n 6 c/s 19 8 41 255 c
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
